Arista Flag Corporation - Nylon Outrigger Banners- Outrigger Banners Mounted on Building

Nylon Outrigger Banners
Single-Side or Double-Side Construction

Banners Made to Hang From Outrigger Poles Mounted on a Building Face

Methods and Materials

After you review the information on this page, if you would like more information on the methods and materials used to make this product, follow the links below.
We suggest that you review the information on this page first.

Nylon
Polyester

Sewn & Appliquéd on Nylon

Printed Dye-Sublimation on Polyester

Available Options

straight or angled cut
grommets and grommet patch
rope loop with metal thimbles
lining
air pockets

building tie-down
nylon borders
sand pocket
non-tangle rod patch

Common Sizes (in feet)

4 x 6
5 x 8
5 x 10
6 x 10
6 x 12
8 x 10

8 x 12
10 x 12
10 x 15
10 x 18
12 x 18

After reviewing our website, if you have any additional questions, feel free to contact us via email, phone, or fax.

Also see our section on Basic Construction Shapes.

Photographs of Outrigger Banners in Main Gallery

Suggestion: When ordering a non-tangle rod make sure that the flag or banner purchased is supplied with a non-tangle rod patch. The patch is multi-layered and ensures that the clamp will have a good hold and not tear the fabric. If you purchase flags or banners from us, we can supply them with non-tangle rod patches for a modest additional charge. The non-tangle rod patch will be positioned according to the length of the rod used.

A grommet patch can be used with most outrigger flags or banners and is suggested for use where it is possible to connect a tension cord from the patch to a tie-off point on the building surface. The extra layers of the patch will prevent the grommet from coming loose under stress. A grommet patch is used in lieu of a building tie-down. (See Outrigger Banner diagram above).

Suggestion: A sand pocket is intended to keep the flag or banner straight and weighted-down. Is is used in conjunction with a building tie down and grommet patch. Cost is determined by the size of the sand pocket. Sand my be added on location to reduce shipping costs.

Non-Tangle Rod
Available in
2 1/2', 4', 6', and 7'
Prevents flag from wrapping around outrigger style poles. The bronze clamp is attached to the bottom side of the flag or banner. The ring and hook attach to the halyard roping. To purchase
non-tangle rods:
www.aristaflagstore.com/non-tanglerods.aspx

Suggestion: When using a non-tangle rod always be sure that the the flag or banner has a non-tangle rod patch sewn on to strengthen the area where the clamp is attached. This will prevent premature wear of the flag or banner.

Homesteader 10' Outrigger Poles

These high quality 10' outrigger poles can be wall mounted to display your flag or banner at a 30 degree or 45 degree angle. Standard fittings include: 3" gold anodized aluminum ball ornament, cast aluminum truck with pulley, 30" solid braided polypropylene halyard (rope) with 2 nylon flag snaps, cast nylon rope cleat with mounting screws, 30 degree or 45 degree mounting bracket (mounting hardware not included). The pole consists of two sections with a 2" butt diameter. This item can be shipped by UPS.

10' Outrigger Set (flag not included)

Outrigger Bracket Only:

You can purchase these items
online at our Internet Flag Store!